Hot Selling Machines
Mining Machines Home>Products

Copper Slag As Sand Replacement In Indonesia

2020-09-26T02:09:47+00:00
  • Copper slag as sand replacement for high performance ...

    2009-08-01  Copper slag has a specific gravity of 3.4 which is higher than that for sand (2.77) and OPC (3.15) which may results in production of HPC with higher density when used as sand substitution. Also, the measured water absorption for copper slag was 0.17% compared with 1.36% for sand.

  • Cited by: 233
  • Life-Cycle Assessment of High-Strength Concrete Mixtures ...

    Copper slag, a readily available waste material from shipyards in Singapore, is a possible replacement material for a portion of the natural sand in concrete mixtures, thus sustaining the

  • Cited by: 7
  • A CASE STUDY ON COPPER SLAG AS PARTIAL REPLACEMENT OF

    From the results, it is concluded that the increased replacement level of Copper slag) increased the compressive strength, splitting tensile strength values of mixes. Results recommended using Copper slag as Partial replacement sand are economical. Key Words: Copper slag, Slump test, Compressive Strength, Split Tensile Strength

  • Copper Slag Replacement Sand - bakermansmakelaardij.nl

    Copper Slag Replacement Sand. 2017-12-15environmental concern but also finding a value -added and meaningful substitute for natural sand c opper slag is totally inert material and its physical properties are similar to natural sand a laboratory study was carried out in the institute. Get A Quote . Your demand. Contact Information. Zhengzhou High-tech Zone, China [email protected] A study on ...

  • Effects of Copper Slag as Sand Replacement in Concrete

    The compressive strength of cube specimen for different copper slag content as a replacement of sand at 7, 28, and 56 days curing period respectively is presented below. These results show an increasing profile up to 40% replacement of copper slag and then it shows decreasing profile as more copper slag is added.

  • Partial Replacement Of Sand By Copper Slag - Henan FUMINE ...

    Partial replacement of sand by Copper Slag in concrete is allowed up to 10 by mass. Copper Slag has similar properties to sand and is a very effective substitute during monsoon rainy season. Further Copper Slag is also used in the production of cement mortar and concrete as a raw material for clinker cement replacement coarse and fine . Read mMore; Utiliation Of Copper Slag As A Partial ...

  • A Review on Partial Substitution of Copper Slag with Sand ...

    Copper slag which is an industrial waste product can be used as replacement for cement with sand and contributes to the increase in various mechanical properties of concrete. Copper slag can be used up to 30% but when used ahead of 50% results in decrease in strengths.

  • Author: Paresh Tiwari, Anil Kumar Saxena
  • Utilization of Copper Slag in M-Sand as Partial ...

    Copper Slag As Sand Replacement For High Performance Concrete”CCC, Volume 31, Issue 7, August 2009, Pages 483-488 [3] Wei Wu. Weide Zhang, Guowei Ma,” optimum content of copper slag as a fine aggregate in high strength concrete” Materials Design,Volume 31, Issue 6, June 2010, Pages 2878-2883. [4] Sushma.v, Dr. Suresh Babu.T, Manikanta.k.v, Anvesh Kumar.M Copper Slag By Observing

  • Replacement of Copper Slag used as Abrasive Blasting Media ...

    in sand, use of sand as abrasive media for blasting is prohibited. Currently copper slag is used widely in Shipbuilding and ship repair industries, due to its low cost, more area coverage and its high efficiency. III. M The methodology adopted for collecting the data’s and their study at site includes the following. A study on the alternative abrasive blasting media used in other ship ...

  • Comparison of The Replacement of Natural Sand by Copper ...

    It is recommended that 50 % of copper slag can be used as replacement of sand and 18% fly ash can be used as replacement of cement in order to obtain HSC with good fresh and mechanical properties.

  • Copper slag as sand replacement for high performance ...

    Addition of up to 50% of copper slag as sand replacement yielded comparable strength with that of the control mix. However, further additions of copper slag caused reduction in the strength due to an increase of the free water content in the mix. Mixes with 80% and 100% copper slag replacement gave the lowest compressive strength value of approximately 80 MPa, which is almost 16% lower than ...

  • Copper Slag Replacement Sand - bakermansmakelaardij.nl

    Copper Slag Replacement Sand. 2017-12-15environmental concern but also finding a value -added and meaningful substitute for natural sand c opper slag is totally inert material and its physical properties are similar to natural sand a laboratory study was carried out in the institute. Get A Quote . Your demand. Contact Information. Zhengzhou High-tech Zone, China [email protected] A study on ...

  • Sand Replacement - an overview ScienceDirect Topics

    Chao Qun Lye, in Sustainable Construction Materials: Copper Slag, 2017. Air Voids (Figure 7.7(c)) In a compacted mix, the small air pockets trapped within the bitumen and between the bitumen-coated aggregate particles are known as air voids. The target air void content of a bituminous bound mix is normally between 3% and 5% of the total volume of the mix for all traffic conditions. Figure 7.7 ...

  • Comparison of The Replacement of Natural Sand by Copper ...

    Ahmed etal [6]studied oneffect of copper slag as a sand replacement on the properties of concrete, this study reports the potential use of granulated copper slag from Sterile Industries as a replacement for sand in concrete mixes. In this work M40 grade concrete was used and different percentage replacement of sand by granulated copper slag were 0%, 10%, 20%, 30%, 40%, 50% and 60%.The

  • Partial Replacement Of Sand By Copper Slag - Henan FUMINE ...

    Partial replacement of sand by Copper Slag in concrete is allowed up to 10 by mass. Copper Slag has similar properties to sand and is a very effective substitute during monsoon rainy season. Further Copper Slag is also used in the production of cement mortar and concrete as a raw material for clinker cement replacement coarse and fine . Read mMore; Utiliation Of Copper Slag As A Partial ...

  • Replacement Of Fine Aggregate With Copper Slag For Hpc ...

    2019329Copper slag is one of the byproduct materials from the copper smelting. In Indonesia around 400000 tons of copper slag are produced per year by Freeport Company and Newmont Company 3. This number is a motivation for the researchers to study the copper slag as aggregate or cement replacement in concrete.

  • Utilization of Copper Slag in M-Sand as Partial ...

    Copper Slag As Sand Replacement For High Performance Concrete”CCC, Volume 31, Issue 7, August 2009, Pages 483-488 [3] Wei Wu. Weide Zhang, Guowei Ma,” optimum content of copper slag as a fine aggregate in high strength concrete” Materials Design,Volume 31, Issue 6, June 2010, Pages 2878-2883. [4] Sushma.v, Dr. Suresh Babu.T, Manikanta.k.v, Anvesh Kumar.M Copper Slag By Observing

  • Copper Slag Replacement

    Copper slag as sand replacement for high performance. Aug 01, 2009 Addition of up to 50% of copper slag as sand replacement yielded comparable strength with that of the control mix. However, further additions of copper slag caused reduction in the strength due to an increase of the free water content in the mix.get price. Cited by: 233 . Utilization of Copper Slag in M-Sand as Partial. This ...

  • Copper Slag Garnet Sand Steel Grit Glass Beads for ...

    Copper slag blasting undertaken by us is well-known for its fine finishing, smooth edges and accuracy. We ensure our clients that sandblasting abrasive are completed within the stipulated time frame as per the customized orders of clients.. Two grades are available to suit the most common blasting operations. The hardness and high density of us give it a high resistance to fracture with very ...

  • CHAPTER 2 LITERATURE REVIEW - Shodhganga

    Addition of upto 50% of copper slag as sand replacement yielded comparable strength with that of the control mix. However, further additions of copper slag caused reduction in the strength due to an increase of the free water content in the mix. Mixes with 80% and 100% copper slag replacement gave the lowest compressive strength value of approximately 80 MPa, which is almost 16% lower than the ...

  • Copper slag as sand replacement for high performance ...

    Addition of up to 50% of copper slag as sand replacement yielded comparable strength with that of the control mix. However, further additions of copper slag caused reduction in the strength due to an increase of the free water content in the mix. Mixes with 80% and 100% copper slag replacement gave the lowest compressive strength value of approximately 80 MPa, which is almost 16% lower than ...

  • Copper Slag Replacement Sand - bakermansmakelaardij.nl

    Copper Slag Replacement Sand. 2017-12-15environmental concern but also finding a value -added and meaningful substitute for natural sand c opper slag is totally inert material and its physical properties are similar to natural sand a laboratory study was carried out in the institute. Get A Quote . Your demand. Contact Information. Zhengzhou High-tech Zone, China [email protected] A study on ...

  • Copper Slag Replacement

    Copper slag as sand replacement for high performance. Aug 01, 2009 Addition of up to 50% of copper slag as sand replacement yielded comparable strength with that of the control mix. However, further additions of copper slag caused reduction in the strength due to an increase of the free water content in the mix.get price. Cited by: 233 . Utilization of Copper Slag in M-Sand as Partial. This ...

  • Utilization of Copper Slag in M-Sand as Partial ...

    Copper Slag As Sand Replacement For High Performance Concrete”CCC, Volume 31, Issue 7, August 2009, Pages 483-488 [3] Wei Wu. Weide Zhang, Guowei Ma,” optimum content of copper slag as a fine aggregate in high strength concrete” Materials Design,Volume 31, Issue 6, June 2010, Pages 2878-2883. [4] Sushma.v, Dr. Suresh Babu.T, Manikanta.k.v, Anvesh Kumar.M Copper Slag By Observing

  • Effect Of Copper Slag As A Sand Replacement On The ...

    Copper Slag as a Sand Replacement can be used due to the following reasons: It has a high Compressive strength which is equal to that of Fine Aggregate with similar diameter. Copper Slag is a non-degradable matter; it is creating an environmental problem so when used as a Replacement for Sand and can minimize Environmental problems. It is also available in abundance and at a very low

  • Study on Strength of High Performance Concrete by Partial ...

    50% of copper slag as sand replacement yielded comparable strength with that of the control mix. However, further additions of copper slag caused reduction in the strength due to an increase of the free water content in the mix. Ramzitaha et al.(2011),In this, Various mortar and concrete mixture were prepared with different proportion of copper slag ranging from 0% to 100% as fine aggregates ...

  • Partial Replacement of Copper Slag as Fine Aggregate

    Partial Replacement of Copper Slag as Fine Aggregate Ambrish E1, Dhavamani Doss S2, ... copper slag is widely used in the sand blasting industry and in the manufacturing of abrasive tools, the remainder is disposed of without any further reuse or reclamation. The use of copper slag in the concrete industry as a replacement for cement can have the benefit of reducing the costs of disposal

  • Performance of Copper Slag on Strength as Partial ...

    This study reports the potential use of granulated copper slag from Sterile Industries as a replacement for sand in concrete mixes. The effect of replacing fine aggregate by copper slag on the compressive strength and split tensile strength are attempted in this work. Leaching studies demonstrate that granulated copper slag does not pave away for leaching of harmful elements like copper and ...

  • Research Paper EFFECTS OF SUSTAINABLE MATERIALS AS PARTIAL ...

    Copper slag as partial replacement for sand at 25, 50 and 75% was used. The dosage of Super plasticizer used in this experimental investigation was 0.75% by the weight of cement and w/b ratio was 0.38. The sustainable material used simultaneously in this study of fresh concrete because of its particle size and shape is lesser for the binder material and the internal friction between the ...

  • Effect of copper slag as fine aggregate replacement in ...

    2019-01-01  The copper slag as a replacement to aggregates has threefold advantages of eliminating the costs of dumping, reducing the cost of concrete and minimizing air pollution problems. CS was also used as a replacement to cement in concrete production. The researches which were conducted regarding the utilization of these environmental pollutant waste materials in the construction field were

  • STUDY ON COPPER SLAG AND MICRO SILICA EFFECTS IN

    Al-Jabri (2009) studied th e effect of replacement of copper slag with sand on the mechanical properties of high performance concrete (HPC). A total of eight concrete mixtures were made with different percentages of copper slag from 0% (for control mix) to 100% with 10% intervals. The Concrete mixes were tested for density, workability, compressive strength, split tensile strength, flexural ...

  • Performance of Copper Slag on Strength as Partial ...

    This study reports the potential use of granulated copper slag from Sterile Industries as a replacement for sand in concrete mixes. The effect of replacing fine aggregate by copper slag on the compressive strength and split tensile strength are attempted in this work. Leaching studies demonstrate that granulated copper slag does not pave away for leaching of harmful elements like copper and ...

  • Studies on use of Copper Slag as Replacement Material for ...

    Abstract This work focuses on the use of copper slag, as a partial replacement of sand for use in cement concrete and building construction. Cement mortar mixtures pre-pared with fine aggregate made up of different proportions of copper slag and sand were tested for use as masonry mortars and plastering. Three masonry wall panels of dimensions 1 9 1 m were plastered. The studies showed that ...

  • Coal/Copper Slag Abrasive Sandblasting Media » Blast ...

    Coal slag is a Limestone matrix alumina-silicate which is produced as a by-product of coal burning power plants. As it burns, the residual ash becomes molten. When this slag is cooled, it vitrifies into a Limestoney, abrasive material, which is then crushed to produce blast media. SPECIFICATIONS

  • copper slag as sand replacement in india

    Effects of Copper Slag as Sand Replacement in Concrete. The compressive strength of cube specimen for different copper slag content as a replacement of sand at 7, 28, and 56 days curing period respectively is presented below. These results show an increasing profile up to 40% replacement of copper slag and then it shows decreasing profile as more copper slag . Studies on use of Copper Slag

  • copper slag replacement sand - boumaninstallatietechniek.nl

    AlJabri et al used copper slag as sand replacement for high performance concrete 6 AlJabri et al examined the effect of copper slag as fine aggregate on the characteristics of cement mortar . Online Chat USE OF COPPER SLAG IN CONCRETE AND CEMENT. using copper slag as a replacement of fine aggregate on the strength properties M25 grade concrete was used and tests were conducted for

  • Effect Of Copper Slag As A Sand Replacement On The ...

    Copper Slag as a Sand Replacement can be used due to the following reasons: It has a high Compressive strength which is equal to that of Fine Aggregate with similar diameter. Copper Slag is a non-degradable matter; it is creating an environmental problem so when used as a Replacement for Sand and can minimize Environmental problems. It is also available in abundance and at a very low

  • Durability Study of Concrete Containing Copper Slag as a ...

    Copper slag as a replacement of sand that concrete exhibits enhanced mechanical properties with reference to conventional concrete. Key words: Copper Slag, Durability, Sand Replacement, Acid Attack Test and Water Absorption Test I. INTRODUCTION Concrete is one of the major construction materials being used worldwide. Concrete is the composite material composed of cement, natural sand

  • C i E n v ironmental Journal of Civil Environmental ...

    wt% of copper slag can used as replacement of sand in order to obtain HPC with good strength and durability properties [4,5]. Materials and Methods Materials There are many types of concrete available, created by varying the proportions of the main ingredients below. In this way or by substitution for the cementitious and aggregate phases, the finished product can be tailored to its ...

  • Copper Slag As Sand Replacement In Zambia

    Copper Slag As Sand Replacement In Zambia. March 25, 2015 2015018332 in the photo, Heishan is a copper slag heap, located in the town of Kitwe wusakile. Slag is a kind of waste left over from the extraction of metal from ores. It is used in road and railway subgrade construction after mixing with cement. It can also be used for sandblasting of roof tiles and many other purposes . Send Message ...

  • TEL
    0086-21-33901608